Kenwood NXR-1700E VHF Repeater

Kenwood NXR1700E
Kenwood NXR1700E_Front
Kenwood NXR1700E_Side
Kenwood NXR1700E_Top
Kenwood NXR1700E_Back
Kenwood NXR1700E_Accessories

The Kenwood NXR-1700E

The NXR-1700E is the VHF version of Kenwood’s NXR-1700E/NXR-1800E2 range, operating on 136 – 174 MHz.

The Kenwood NXR-1700E is a compact, multi-mode conventional two-way radio repeater for long-range communications networks. It is designed for powerful, basic functionality with 50/40 W – 1 W RF output power and up to 32 channels. It is also space-efficient, with two repeaters fitting in a 1U height, 19-inch rack.

Beyond its basic design, the NXR-1700E has extensive functionality. This includes non-repeat simplex/semi-duplex mode for analogue and NXDN digital, a built-in IP network adapter and multi-cast routing. It is also built with high-quality hardware, including a thermal-controlled cooling fan.

The Kenwood NXR-1700E is available as an analogue version or as a digital key installed version. With the digital key installed version, the CAI is chosen when ordering to set up individual units for either DMR or NXDN protocols.

Make an enquiry
Categories: Radio Repeaters

Kenwood NXR-1700E VHF Repeater

The Kenwood NXR-1700E is a radio repeater for long-range two-way radio communications. It is the perfect successor to Kenwood’s existing DMR and NXDN repeaters, providing powerful conventional radio repeater functionality in a compact device. It is available as an analogue version or with a pre-installed digital key. Digital versions can be programmed for DMR tier II or NXDN conventional protocols. Non-repeat simplex / semi-duplex modes are available for analogue and NXDN digital.

Two NXR-1700E devices fit in a 1U height, 19-inch rack, and they feature a large 17-inch OLED display that shows MAC/IP address, RSSI/TX power setting icon, channel number/name, and RF frequency as well as firmware/ESN/license/error information and other statuses.

Functionality on the NXR-1700E long-range two-way radio network repeater includes 50 – 1 W RF output power, up to 32 channels, a built-in IP network adapter, multicast routing and SNMP protocol for direct reporting to a generic system. The Kenwood NXR-1700E also supports G.711 audio codec (for test console and third-party applications), IP remote management, IPIF to external applications (for IP console and OTAP), a built-in SIP IF without external IP console or gateway (digital only), IP remote control interface (IPRCI), enhanced security and CW ID.

Other features include a thermal-controlled cooling fan, an external power supply, a USB-A connector ready for audio accessories, an external in/out pin from DB25, hot standby system redundancy and a hang timer.

Key Features

  • VHF operation on 136 – 174 MHz.
  • Space-saving compact design – fit two repeaters in a 1U height, 19-inch rack.
  • DMR Tier II and NXDN conventional digital protocols, programmed on setup.
  • Analogue functionality.
  • 50/40 W – 1 W RF output power (Up to 50/40 W@50%, 25 W@100% duty cycle).
  • Perfect successor to existing DMR and NXDN repeaters.

Kenwood NXR-1700E Hire and Purchase

Whether you want to hire or purchase, Digitall Comms has you covered. Make a purchase or hire enquiry today or if you have any additional questions, don’t hesitate to contact us.

More Information

Find out more about the Kenwood NXR-1700E in the brochure.



Download brochure

Additional information

Brand

Product Type

Technology